Dirt embedded in the holes of the mobile phone can really be a nuisance when cleaning the phone since it is very difficult to remove the dirt that gets into the holes of the device. So that it is not such a tedious task, today we are going to see the definitive way to easily clean the dust inside our phones.
What do you need to clean the dust inside your smartphone?
In other articles we have seen how to clean yellowed mobile phone case and to continue with the cleaning tricks, today you will see how to easily clean dust from the gaps of your mobile.
The only thing you need are everyday objects that you can have at home. Specifically you need a vacuum cleaner, a small PVC bottle and a straw. But in addition to this we will use tools such as a lighter or scissors to make the hole in the bottle. I'll give you a list with everything you could need.
- Small PVC bottle
- plastic drinking straw
- Scissors, cutter or any cutting tool.
- tape paper
- Silicone or glue.
- Lighter.
Once you have gathered the materials we need for this trick we can begin.
How to increase the power of your vacuum cleaner
First of all we will create a funnel for our vacuum cleaner. To do this, we take scissors, a cutter or any sharp object to cut the top of the bottle, creating a funnel-shaped opening. Keep in mind to adjust the size of the opening so that it is slightly larger than the diameter of your vacuum cleaner's hose.
Now we will have to do a hole in the area of the bottle cap where we are going to place the straw. As before with the size of the vacuum cleaner hose, this time we will have to adjust the gap of the cap to the straw so that it is as tight as possible. Don't worry if it isn't perfect because that's what silicone or glue is for, to cover and glue the straw into the gap without cracks.
Once you have the straw connected to the bottle check that no air is escaping somewhere other than the mouth of the drinking straw. When it is completely closed you can move on to the next step.
What you should do now is perhaps the simplest part, which is integrate our funnel with straw to the mouth of the vacuum cleaner hose. In this case we will use the tape paper to join the cut base of the bottle with the vacuum cleaner.
If you have done it well now you have a more precise vacuum cleaner with greater suction power.
What is it for
Basically what we would be achieving with this trick is improving the suction power of the vacuum cleaner itself. This is due to a very simple physical issue since the increase in suction observed when modifying the vacuum cleaner with a PVC bottle and a straw is based on the Bernoulli's principle where an increase in air flow is generated as it passes through the narrow straw.
In other words and so that we understand each other clearly, As the air outlet gap is smaller, the air jet becomes more powerful. Check it by blowing into your hand with your mouth almost closed and with your mouth open, you can notice the difference right?
And this improvement in the suction power that we have just achieved is used to vacuum dirt from difficult areas such as cleaning the dust inside the charging compartment of our mobile phone. Furthermore also you will be able to vacuum heavier dirt such as embedded dust.
So if you've ever had to deal with cleaning the headphone jack connector or simply the charging connector doesn't work well for you, Try this trick and tell me how it went. I hope it went great for you.